CAME ZR24N - Control panel with radio receiver

ZR24N electrical panel is suitable for controlling 230V single-phase gearmotors with power up to 500W, frequency 50 ÷ 60Hz.

Designed and built entirely by CAME CANCELLI AUTOMATICI S.p.A., it complies with the current regulations in force.

ABS case with IP54 degree of protection.

AF43s receiver card included

The card must be powered at 230V a.c. on terminals L1 and L2, and is protected at the input with a 5A fuse, while the 24V low voltage accessories are protected with a 1A fuse.
The total power of 24V accessories must not exceed 5W.

Security inputs

reopening during the closing phase, the safety devices detecting an obstacle during the automation closing phase, cause the direction reversal up to & nbsp; complete opening;

total stop

automation stop with the exclusion of the automatic closing cycle. To resume movement & nbsp; the automation, press the command button or the remote control.

Available functions

automatic closing, the automatic closing timer is self-powered at the end of the working time it opens. The pre-set adjustable time is in any case subordinate & nbsp; from the intervention of any safety accessories and is excluded after a "stop" or in the absence of electricity.

maintained action command, automation operation & nbsp; keeping the connected button pressed & nbsp; on contact 2-7, it is enabled by setting the minimum working time. Excludes the radio control function;

command setting command of "open-stop-close-stop" or "open-close" command (setting by means of a dipswitch).

Settings

- automatic closing time;

- working time